Instructions on how to Ghost Win from USB using HP USB Dish Storage Format Tool are specific and detailed step by step below, you refer to be able to Ghost Win from USB easily, quickly and effectively.
Every time your computer crashes, viruses and works sluggishly, you usually think about reinstalling the operating system. However, this takes a lot of your time. Computer ghost is the way that many users choose every time the system fails instead of reinstalling the operating system. However, for those who rarely use computers, this method is not simple. We will show you how to ghost Windows from USB using HP USB Disk Storage Format Tool.
Guide to Ghost Win from USB using HP USB Disk Storage Format Tool
How to Ghost Win from USB using HP USB Disk Storage Format Tool
You need to prepare:
– USB with a capacity of about 1Gb (If installing Windows Xp), or 4Gb (If installing Windows 7/8)
– USB format software. Download:
BootFile contains boot files and Ghost.exe files. Download:
– File Ghost OS versions
– Ghost Win 10 series
– Ghost Win 7 series
– Ghost Win 8 series
– Ghost Win XP
Step 1: Attach the USB to the computer and boot the HPUSBFW software.exe then select as shown below
Step 2: After downloading the BootFile above, extract to a separate folder (including BoottFile and Ghost.exe)
Click the “…” button to open BootFile then Click OK.
Step 3: Click Start for the program to proceed to reformat the USB for you
Step 4: Click Yes to confirm
Step 5: When the USB is finished formatting, you need:
– Copy the Ghost.exe file (extracted above) to USB.
– Copy *.ghost file (File you created earlier, Win 7 or Win 8) to USB, you can refer to the article
– Set up in the BIOS, for the computer to boot from USB (Depending on the type of machine you can access the BIOS, you usually press F2 or Delete). Or you can refer to
At the Dos screen, type in the command line ghost or ghost.exe then Enter to launch the Ghost program
Step 6: When the Ghost program starts, it will have an interface as shown below, click OK to continue.
Step 7: Here select Local then Partition and then select From Image
Step 8: Select the arrow keys to select the partition to save File Ghost
Step 9: Here select the previously saved Ghost file and then Click Open to extract that Ghost file
Step 10: You select the hard drive (if your computer has 2 or more hard drives, you must choose the exact hard drive that needs Ghost to avoid data loss when Ghost is mistaken) then Click OK to proceed with Ghost
Step 11: After selecting the hard drive, you need to select the hard drive partition to Ghost and click OK
Step 12: When there is a message you select Yes to specify
Step 13: After clicking Yes the program will proceed to ghost your computer, you wait for a few minutes then restart the computer will get into the Windows operating system
So we have shown you how to Ghost Windows from USB using HP USB Disk Storage Format Tool. In addition, you can refer to the ways to Ghost